日韩精品中文字幕在线看,女人夜夜春高潮爽A∨片,被人爆操内射进去的视频,在全网站搜索女人完逼洞

Ningbo Qiyi Precision Metals Co., Ltd.

18年專注數控機床研發制造

經驗豐富,實力超群 數控機床熱銷全國

Hotline

0574-87019522

News

Latest News

Contact Us

Contact person: Ms. Karen Tang

Mobile: 0574-87019522

Tel: 0574-88365168 TO 261,262,263,266,267,270,276

Email: sales@qiyi.com.cn

Adderss: 182 XinMei Road, Ningbo, Zhejiang, China

News

304 stainless steel, 430 stainless steel, 310 stainless steel surface is damaged, how should it be maintained?

Author:Ningbo Qiyi Precision Metals Time:2015-06-09 15:54:45

1, dust

Production is often in dusty venues, often with a lot of air dust, they continue to fall on equipment surfaces. They can be removed with water or an alkaline solution. However, there is adhesion of dirt requires high pressure water or steam to clean up.


2, iron or embedded floating iron

On any surface free iron will rust and corrode the stainless steel. Therefore, it must be removed. IRES can generally be removed together with the dust. Some strong adhesion, must be embedded in the iron handle. In addition to dust, many sources of iron surface, including the use of ordinary carbon steel wire brush cleaning and shot peening with previously used on carbon steel, low alloy steel or cast iron through sand, glass beads or other abrasive, or near the stainless steel parts and equipment for non-stainless steel products mentioned were grinding. Hanging over the next material or process if we do not take measures to protect stainless steel wire rope, spreader and work surface iron easily embedded or stain the surface.

If rust test solution can not be fully cleaned, the surface is not recommended in the process of equipment that is used to produce direct contact with the surface of human consumption using this test method. Relatively simple test method is exposed for 12 to 24 hours in the water, check for rust. This test is poor sensitivity and time-consuming. These are testing, not the clean-up methods. If you find the presence of iron, it must be cleaned with a later introduction of chemical and electrochemical methods.


3, scratches

To prevent the process lubricant or product and / or dirt accumulates, the need for scratches and other rough surfaces are generally removed by mechanical cleaning of stainless steel for polishing machine. Hot temper color, and other oxide if the welding or repair stainless steel mill during the air is heated to a certain temperature, on both sides of the weld, the weld and the lower surface of the bottom will appear chromium oxide hot temper color. Hot temper color than the thin protective oxide film, and clearly visible. Color depends on thickness, may be in rainbow colors, blue, purple and brown to yellowish. Thicker oxide is black. It is due to due to high temperatures or long stay in the more highly. When any one of such oxide layer occurs, the metal surface of the chromium content will be reduced, resulting in reduced corrosion resistance of these regions. In this case, not only to eliminate hot temper color, and other oxide layers, they also deal with the following lean chromium metal layer to clean up.


4, rust

Pre-production or production process sometimes see rust on stainless steel products or equipment, indicating that the surface is seriously contaminated. The rust must be removed before the equipment off and put into use, the surface should be cleaned thoroughly checked by the iron test and / or water test.


5, coarse grinding and machining

Grinding and machining will result in a rough surface, leaving grooves, overlapping and burrs. Each defect may also damage the metal surface to a certain depth, so that the damaged metal surface can not be cleaned up by pickling, electro-polishing or shot (such as dry sandblasting, abrasive glass beads used) or the like. Rough surfaces can become corrosion and deposition product birthplace, before re-welding trimming or removing excess weld defects Strengthening do not use coarse grinding polished.

The effects of these pollutants affect similar oils and fats. We recommend washing with a clean brush and clean water or alkaline cleaning agents and can also be used high-pressure water or steam rinse. In the case of using the state to ferrite-based stainless steel. Chromium content of 11% to 30%, with a body-centered cubic crystal structure. Such steel is generally not contain nickel, it may also contain minor amounts of Mo, Ti, Nb until the element type of steel with a thermal coefficient of expansion coefficient, good oxidation resistance, excellent resistance to stress corrosion, are used for the manufacture Weathering , steam, water and oxidizing acid corrosion of components.

The existence of such steel plastic poor ductility and corrosion resistance after welding and other shortcomings significantly reduced, thus limiting its application.


Related news

Online Service
Contact us

Hotline

0574-87019522

Tel

0574-87019522

QR code
99国产精品白浆在线观看免费 | 国产精品亚洲av一区三页| 韩国一级爱做片观看视频| 少妇精品久久久久久久网| 99久久精品费精品蜜臀| 国产视频五月天在线观看| 丁香花电影视频在线观看| 专干老熟女a片| 深夜老司机一区二区三区| 久久亚洲欧美日韩精品专区| 尤物中字无码动漫在线看| 五月天亚洲色图一区二区| 午夜视频 无码| 日本vs欧美一区二区三区| 成人男女激情一级A毛片| 大学生精品视频在线一区| 日韩女人操逼网| 久久综合九色综合欧美狠狠| 女人玩鸡巴操逼| 日本欧美精品成人久久久| 搔逼干死你观看| 日本一在线中文字幕dvd| 狠狠鲁狠狠操天天晚上干干| 一区视频二区视频三区视频| 日本无码小泬粉嫩有套在线| 天堂网av免费在线观看| 日韩精品一区二区三区夜色| 国产黄色三级三级三级视频| 久久精品国产一区老色匹| 白丝jk超短裙制服自慰| 不要抽骚货的骚逼了视频| 少妇被又大又粗又爽毛片欧美| 做床爱免费观看30分钟| 日本 艹 骚货| 黑屌日逼操穴网| 操美女大白屁股白浆aV| 亚洲日本中文字幕在线| 国产一级a爱做片777| 精品日韩岛国一区二区三区| 变态妹子使劲干| 狠狠色噜噜狠狠亚洲AV|